Memory Alpha
Memory Alpha
m (Robot: Automated text replacement (-\[[Hh]ttp://www.st-minutiae.com/(.+?)\.txt (.+?)] +{{st-minutiae|\1.txt|\2}}))
Tag: apiedit
(27 intermediate revisions by 8 users not shown)
Line 16: Line 16:
   
 
== Technical data ==
 
== Technical data ==
Borg spheres were used by the Borg as [[scout ship]]s or long-range tactical vessels. Borg sphere were also embedded into some [[Borg cube]]s, and were used as auxiliary craft. ({{film|8}}; {{VOY|Dark Frontier|Drone}})
+
Borg spheres were used by the Borg as [[scout ship]]s or long-range tactical vessels. Borg spheres were also embedded into some [[Borg cube]]s, and were used as auxiliary craft. ({{film|8}}; {{VOY|Dark Frontier|Drone}})
   
Borg spheres had a crew complement of 11,000 [[Borg drone]]s. ({{VOY|Unimatrix Zero, Part II}})
+
Borg spheres had a crew complement of 11,000 [[Borg drone]]s. ({{VOY|Unimatrix Zero, Part II}}) The spheres were approximately 600 meters in diameter, and had an interior bay large enough to hold an {{Class|Intrepid}} starship. ({{ENT|Regeneration}}; {{VOY|Endgame}})
   
 
Borg spheres had [[transwarp]] capability and [[ablative hull armor]]. They were also equipped with a [[tractor beam]]. ({{VOY|Drone}}) Provided its [[deflector shield]]s were down, a Borg sphere could be destroyed by a {{Class|Sovereign}} [[starship]] with relative ease using [[quantum torpedo]]es. ({{film|8}})
The spheres were approximately 600 meters in diameter, and had an interior bay large enough to hold an {{Class|Intrepid}} starship. ({{ENT|Regeneration}}; {{VOY|Endgame}})
 
   
  +
== History ==
  +
In the year [[2063]], a Borg sphere from the future was used in an effort to prevent an historical event on [[Earth]] known as [[First Contact]], an incident historically brought about by noted inventor [[Zefram Cochrane]]. The sphere launched an attack on Cochrane's hometown of [[Bozeman]], [[Montana]], but was soon destroyed by the {{Class|Sovereign}} {{USS|Enterprise|NCC-1701-E}}, which had followed the sphere back through time. ({{film|8}}) At least some of the remains of this sphere ended up in the [[Arctic Circle]]. In [[2153]], a team of scientists found the remains of the sphere there. ({{ENT|Regeneration}})
   
 
The same vessel had initially been launched from a Borg cube in the culmination of the [[Battle of Sector 001]]. After that incident, the sphere was observed to have [[time travel]] capabilities, by generating a [[temporal vortex]] through the controlled emission of [[chronometric particle]]s; it was this method that enabled the sphere to travel to 2063. ({{film|8}})
Borg spheres had [[transwarp]] capability and [[ablative hull armor]]. They were also equipped with a [[tractor beam]]. ({{VOY|Drone}})
 
   
 
In [[2375]], the crew of the USS ''Voyager'' successfully retrieved a Borg [[transwarp coil]] from a damaged sphere, as part of [[Operation Fort Knox]]. At the time, the sphere was only able to travel at [[Warp factor|warp 2]] because it was regenerating from the damage. ({{VOY|Dark Frontier}})
Provided its [[deflector shield]]s were down, a Borg sphere could be destroyed by a {{Class|Sovereign}} [[starship]] with relative ease using [[quantum torpedo]]es. ({{film|8}})
 
   
In [[2378]], Starfleet attempted to destroy a sphere with a fleet of starships. The sphere was holding the {{USS|Voyager}}, which was able to destroy the sphere from the inside using [[transphasic torpedo]]es. ({{VOY|Endgame}})
+
In [[2378]], Starfleet attempted to destroy a sphere with a fleet of starships. The sphere was holding the {{USS|Voyager}}, which was able to destroy the sphere from the inside using [[transphasic torpedo]]es. ({{VOY|Endgame}})
 
After the [[Battle of Sector 001]], a Borg sphere was observed to have [[time travel]] capabilities, by generating a [[temporal vortex]] through the controlled emission of [[chronometric particle]]s. The Borg sphere traveled back to the year [[2063]], in order to prevent the historical event on [[Earth]] known as [[First Contact]]. ({{film|8}})
 
 
In [[2153]], a team of scientists found the remains of the Borg sphere from 2063 in the [[Arctic Circle]]. ({{ENT|Regeneration}})
 
 
In [[2375]], the crew of the USS ''Voyager'' successfully retrieved a Borg [[transwarp coil]] from a damaged sphere, as part of [[Operation Fort Knox]]. At the time, the sphere was only able to travel at [[Warp factor|warp 2]] because it was regenerating from the damage. ({{VOY|Dark Frontier}})
 
   
 
== Design ==
 
== Design ==
Line 47: Line 43:
 
</gallery>
 
</gallery>
   
== Ships of the Class ==
+
== Ships of the class ==
 
;Designated:
 
;Designated:
 
* [[Sphere 634]]
 
* [[Sphere 634]]
Line 70: Line 66:
 
</div>
 
</div>
   
=== Background ===
+
==== Background ====
  +
A Borg sphere was mentioned for the first time in the first draft script for {{film|8}}, dated {{d|29|September|1995}}, where {{st-minutiae|academy/literature329/fc.txt|scene 4}} described an apparently more belligerent and independently operating sphere as, "''A huge, spherical Borg warship as it takes a phaser shot from an unseen vessel. The BLAST smashes into the Borg Sphere, but the massive ship continues. The Sphere returns FIRE.''" In the movie as featured, however, the sphere was ultimately primarily depicted as an escape vessel for the [[Borg Queen]], though its original aggressive nature was not altogether abandoned, as the vessel was seen bombarding 21st century Earth, before being destroyed by the {{USS|Enterprise|NCC-1701-E|-E}}.
Following on from the sophisticated [[Borg Type 03]], the sphere was the first simple shape devised as an alternative design of Borg spacecraft to the [[Borg cube]] and cubical [[Borg scout ship]]. {{film|8}} co-writer [[Brannon Braga]] mused, "''The idea that we would introduce that Borg ships had different shapes. They weren't all cubes. We have a sphere. It was like this great new idea, you know?''" ([[audio commentary]], [[Star Trek: First Contact (Special Edition)|''Star Trek: First Contact'' (Special Edition) DVD]]/[[Star Trek: First Contact (Blu-ray)|Blu-ray]])
 
 
The Borg sphere was designed by illustrator [[John Eaves]]. During preproduction on ''First Contact'', he submitted several concept sketches of the craft, at least two of which were dated [[January 1996]]. (''[[Star Trek: The Next Generation Sketchbook: The Movies]]'', pp. 204-206)
 
 
Designers of the Borg sphere made a conscious effort to make it look different from similarly shaped crafts in certain other science fiction movies, such as ''Star Wars'' and ''Starman''. John Eaves later recalled, "''Finding a new way to execute a spherical design that wasn't reminiscent of either film was difficult, but I did my darnedest to make it as different as possible.''" (''[[Star Trek: The Next Generation Sketchbook: The Movies]]'', p. 204) Production Designer [[Herman Zimmerman]] described the challenge of differentiating the Borg ship from the Death Star as "our biggest problem" and went on to say, "''I think we managed that successfully. We just made it look completely different. The Borg, of course, have a unique look, and we Borgified that sphere.''" (''[[The Making of Star Trek: First Contact]]'', p. 71)
 
 
The minute detailing on the hull of the Borg sphere took its cue from that on the hull of the Borg cube from ''[[Star Trek: The Next Generation]]''. Stated John Eaves, "''The details are extremely faceted low relief, combined with high relief to cause a series of multiple planes. We also left cylindrical openings at the north and south poles where all the detail comes to an edge, then cascades down into a half sphere. Looking down on it, you can see a 'dome inside a dome.{{'}}''" In one of the concept illustrations dated January 1996, Eaves hid the names of his wife Diane and his two daughters, Olivia and Alicia, among the Borg sphere's extremely intricate outer details. He added, "''What's funny about this is that [[Playmates]] put out a toy Borg sphere&ndash;which just happens to contain the first initial of everyone's name.''" (''[[Star Trek: The Next Generation Sketchbook: The Movies]]'', pp. 204, 205 & 215)
 
 
The external complexities of the Borg sphere meant it was easier to depict realistically with a [[studio model]] than with [[CGI]]. Hence, the craft was built as a motion-control model by [[Industrial Light & Magic]], an effort led by ILM veteran model-maker [[John Goodson]], responsible for supervising the model shop at ILM. (''[[Cinefantastique]]'', Vol. 28, No. 6, p. 23; ''[[Star Trek: The Next Generation Companion]]'' 3rd ed., p. 330) The model of the Borg sphere was two feet in diameter. "''We vacuformed about fifteen different patterns that conformed to this spherical curve, and covered those with a lot of molded and cast pieces,''" explained Goodson. "''Then we added tons of acid-etched brass over it, just like we had on the cube.''" (''[[Cinefex]]'', No. 69, p. 109) Despite appearing dark gray on screen, the model was actually painted mainly dark indigo (with silver and gold details). (''[[Star Trek: The Next Generation Sketchbook: The Movies]]'', p. 204)
 
 
That this craft's appearance is similar to the Death Star from the ''Star Wars'' films is not just coincidence, as ILM did all of the effects and modeling for ''Star Wars''. The schematic of a Borg sphere shown in {{VOY|Dark Frontier}} depicts the craft's most striking resemblance to the Death Star.
 
   
 
At one stage while the Borg sphere was being designed, it was conceptualized as measuring 3000 feet (914 meters) in diameter. The design team that worked on ''First Contact'' finally decided it was meant to be only 1500 feet (457 meters) in diameter, as shown in the film's official size comparison chart. ({{STTM|1|23|54 & 50}}) However, according to the size of the debris field, as referenced in {{ENT|Regeneration}}, the radius was calculated at "about 600 meters in diameter."
For {{VOY|Dark Frontier}}, [[Koji Kuramura]] digitally revamped the Borg sphere, at [[Foundation Imaging]]. ({{STM|58}}, p. 46)
 
   
  +
==== Studio models ====
The official size comparison chart from ''First Contact'' defined the size of the Borg sphere as being 1500 feet (457 meters) in diameter. However, according to the size of the debris field, as referenced in {{ENT|Regeneration}}, the radius was calculated at "about 600 meters in diameter."
 
  +
:''See [[Borg sphere model]].''
   
 
[[Category:Borg starship classes|Sphere]]
 
[[Category:Borg starship classes|Sphere]]
Line 93: Line 80:
 
[[ja:ボーグ・スフィア]]
 
[[ja:ボーグ・スフィア]]
 
[[nl:Borg bol]]
 
[[nl:Borg bol]]
[[pt:Esfera Borg]]
+
[[pt:Borg#Esfera Borg]]

Revision as of 19:56, 21 March 2015

The Borg long-range tactical vessel, commonly referred to by the Federation as a Borg sphere, was a sphere-shaped starship used by the Borg Collective during the late 24th century.

Technical data

Borg spheres were used by the Borg as scout ships or long-range tactical vessels. Borg spheres were also embedded into some Borg cubes, and were used as auxiliary craft. (Star Trek: First Contact; VOY: "Dark Frontier", "Drone")

Borg spheres had a crew complement of 11,000 Borg drones. (VOY: "Unimatrix Zero, Part II") The spheres were approximately 600 meters in diameter, and had an interior bay large enough to hold an Intrepid-class starship. (ENT: "Regeneration"; VOY: "Endgame")

Borg spheres had transwarp capability and ablative hull armor. They were also equipped with a tractor beam. (VOY: "Drone") Provided its deflector shields were down, a Borg sphere could be destroyed by a Sovereign-class starship with relative ease using quantum torpedoes. (Star Trek: First Contact)

History

In the year 2063, a Borg sphere from the future was used in an effort to prevent an historical event on Earth known as First Contact, an incident historically brought about by noted inventor Zefram Cochrane. The sphere launched an attack on Cochrane's hometown of Bozeman, Montana, but was soon destroyed by the Sovereign-class USS Enterprise, which had followed the sphere back through time. (Star Trek: First Contact) At least some of the remains of this sphere ended up in the Arctic Circle. In 2153, a team of scientists found the remains of the sphere there. (ENT: "Regeneration")

The same vessel had initially been launched from a Borg cube in the culmination of the Battle of Sector 001. After that incident, the sphere was observed to have time travel capabilities, by generating a temporal vortex through the controlled emission of chronometric particles; it was this method that enabled the sphere to travel to 2063. (Star Trek: First Contact)

In 2375, the crew of the USS Voyager successfully retrieved a Borg transwarp coil from a damaged sphere, as part of Operation Fort Knox. At the time, the sphere was only able to travel at warp 2 because it was regenerating from the damage. (VOY: "Dark Frontier")

In 2378, Starfleet attempted to destroy a sphere with a fleet of starships. The sphere was holding the USS Voyager, which was able to destroy the sphere from the inside using transphasic torpedoes. (VOY: "Endgame")

Design

A sphere had no living quarters, or a discernible engineering section for the propulsion systems. There was, however, a primary shield generator inside the shield matrix. The several transwarp coils of a sphere were contained inside specialized rooms called transwarp chambers that featured heavy shielding. (VOY: "Dark Frontier")

Ships of the class

Designated
Undesignated

Appendices

Appearances

Background

A Borg sphere was mentioned for the first time in the first draft script for Star Trek: First Contact, dated 29 September 1995, where scene 4 described an apparently more belligerent and independently operating sphere as, "A huge, spherical Borg warship as it takes a phaser shot from an unseen vessel. The BLAST smashes into the Borg Sphere, but the massive ship continues. The Sphere returns FIRE." In the movie as featured, however, the sphere was ultimately primarily depicted as an escape vessel for the Borg Queen, though its original aggressive nature was not altogether abandoned, as the vessel was seen bombarding 21st century Earth, before being destroyed by the USS Enterprise-E.

At one stage while the Borg sphere was being designed, it was conceptualized as measuring 3000 feet (914 meters) in diameter. The design team that worked on First Contact finally decided it was meant to be only 1500 feet (457 meters) in diameter, as shown in the film's official size comparison chart. (Star Trek: The Magazine Volume 1, Issue 23, pp. 54 & 50) However, according to the size of the debris field, as referenced in ENT: "Regeneration", the radius was calculated at "about 600 meters in diameter."

Studio models

See Borg sphere model.