Constitution class

File:Enterprise orig.jpg
Original Configuration
Type:	Heavy Cruiser
Length:	289 meters
Beam:	132 meters
Draft:	73 meters
Mass:	<1,000,000 metric tons
Crew:	430 (43 officers, 387 enlisted
Maximum Speed:	Warp 8 (Cochrane scale)
Armament:	2 to 6 phaser emitters, 2 to 6 photon torpedo launchers
Defenses:	Deflector shields
File:Enterprise11.jpg
Refit Configuration
Type:	Heavy Cruiser
Length:	305 meters
Beam:	141 meters
Draft:	71 meters
Mass:	<1,000,000 metric tons
Crew:	500 (72 officers, 428 enlisted)
Armament:	6 phaser emitters (dual mounts), 6 phaser emitters (single mounts), 2 photon torpedo launchers
Defenses:	Deflector shields

The Constitution-class starships were the premiere front-line Starfleet vessels in the latter half of the 23rd century. They were designed for long duration missions with minimal outside support and are best known for their celebrated missions of galactic exploration and diplomacy which typically lasted up to five years.

History

The Constitution class lineage was launched in 2245, and served as Starfleet's front-line vessels for the rest of the century. The Constitution class also served as a mighty deterrent to both the Klingon and Romulan Empires, several times taking part in combat actions which determined the fate of the entire Federation if not the Alpha Quadrant itself. (Star Trek Encyclopedia)

The Constitution class design was probably refurbished some time between 2254, when the USS Enterprise had a crew complement of 203, and 2266, when the Enterprise held an increased crew complement of over 400 (TOS: "The Cage" and "Charlie X").

The most famous Constitution class starship was the USS Enterprise, launched under the command of Captain Robert April in 2245. The Enterprise gained its reputation during its historical five year mission (2265-2270) under the command of Captain James T. Kirk. (VOY: "Q2")

In 2266, on stardate 1709, the Enterprise was instrumental in preventing a war between the Federation and the Romulan Star Empire. When a Romulan Bird-of-Prey crossed the Romulan Neutral Zone and destroyed several Earth Outpost Stations, Captain Kirk barely managed to outwit the enemy commander and stop his vessel from returning to Romulus and reporting on the Federation's weakness. (TOS: "Balance of Terror")

In late-2268, the Constitution class vessels Excalibur, Hood, Lexington and Potemkin took part in the disastrous testing of the M-5 computer, which was in control of the Enterprise. The Excalibur was severely damaged, with all hands lost. The Lexington also was brutally assaulted by the M-5 computer when the unit became unstable. (TOS: "The Ultimate Computer")

File:Defiant-NCC1764.jpg

The Defiant in a Tholian drydock facility

Later that year, the Constitution class starship Defiant responded to a distress call from an unexplored sector of space, claimed by the Tholian Assembly. Shortly upon entering the region, the Defiant class began experiencing sensory distortion, and insanity quickly spread throughout the ship. The ship's medical surgeon was unable to determine what was happening, and eventually the insanity induced by the phenomenon lead the crew to kill each other.

Three weeks later, Starfleet ordered the Enterprise to mount a search mission to locate the Defiant. On stardate 5693.2, the Enterprise located her adrift, lost between universes in a space warp. As a result of a later phaser exchange between the Enterprise and several Tholian vessels, a hole was created through the spatial interphase, pushing the Defiant to parts unknown. (TOS: "The Tholian Web") The Defiant emerged in the 22nd century Mirror Universe, where the Tholians of that universe had created the interphase rift by detonating a tri-cobalt warhead within the gravity well of a dead star. The Defiant would go on to play a major role in Empress Sato's rule over the Earth. (ENT: "In a Mirror, Darkly")

Refit configuration

In the late 2260s to early 2270s, the Constitution class starships underwent a major refit program. The actual refitting took eighteen months of work and essentially a new vessel was built onto the bones of the old, replacing virtually every major system. Thus the Constitution class continued in service for a further twenty years.

Essential upgrades were made to the Constitution class' warp systems; the old cylindrical nacelles were replaced with new angular ones, and also the warp nacelle struts were new, as they were connected to the engineering hull much closer to the neck than before. The engineering hull roughly retained its original shape -- while the original hull was essentially a conical cylinder, the refit was much more rounded. As for the interior of the hull, the most obvious upgrades were the enlargement of the shuttle deck and landing bay, as well as the addition of a horizontal matter-antimatter reaction assembly and a vertical intermix chamber.

New also was the installment of the double photon torpedo launcher with its rectangular housing in the neck of the vessel. Furthermore, the saucer section was considerably extended with almost 20 metres, while the rest of the surface remained about the same. Major changes were made to the interior of the Constitution class starship; however, many new systems were added and existing ones upgraded. Summarizing, only the internal structure of the saucer and very few of the engineering hull and neck may have survived the 2271-upgrade. ("Star Trek: The Motion Picture")

Technical data

Physical arrangement

File:Constitution class original saucer.jpg

Front view of the vessel's primary hull

The Constitution class starships were one of the first to feature the saucer-engineering hull design, which would later become recognizable for most other Starfleet vessels. The hulls were capable of saucer separation in case of emergency; the crew would than evacuate to the saucer module, while personnel unable to escape in time could abandon the engineering hull through way of escape pods. (TOS: "The Apple") The Main Bridge was located on top of the primary hull, while an emergency bridge was located deep within the saucer. The superstructure on top of which the bridge was located featured science labs on the original configuration Constitution class, but would be the location of the officers' lounge and dining area on the refit configuration vessel. (Franz Joseph's Star Trek Blueprints and Shane Johnson's Mr. Scott's Guide to the Enterprise)

Command and control systems

Main Bridge of the USS Defiant (2268)

File:Constitution class bridge console.jpg A duotronic-based data-input console

File:Pike Era Bridge.jpg Main Bridge of the Enterprise in 2254

File:Constitution Original Bridge.jpg Kirk-era bridge (2265)

File:Constitution class refit bridge 1.jpg Refit configuration bridge (2271)

File:Constitution class refit bridge 2.jpg Refit configuration bridge (2286)

File:TUC bridge.jpg Refit configuration bridge (2293)

The Constitution class' primary command centre, the Main Bridge, was located on top of the vessel's primary hull, on Deck 1. From here, the commanding officer supervised the entire starship's operation. The command chair was located in the recessed area at the centre of the room, in a direct line with the main viewer. This postition was equidistant from all the control consoles that operated specific areas of the ship. Consequently, the captain could be immediately updated on the condition of the vessel or its crew durings missions, and orders could be given clearly with a minimum of effort. The chair was mounted on a circular pillar, attached to a retangular footplate that was directly anchored to the deck, giving it considerable support during an attack. It was designed to swivel on the support so that the captain could turn to any member of the bridge crew.

Navigation and vessel course control were carried out at the helm console, located in the centre of the room. This panel consisted of three main sections. On the far left was a flap which opened automatically to permit operation of the targeting scanner. Next to this was the main helm control panel, which operated maneuvering thrusters, impulse engines, and the warp drive. Directly below this panel was a row of eight flip-switches provided to set warp flight speeds. The central section of the conn panel was fitted with a number of sensor monitor lights, and was dominated by two main features: the alert indicator and the astrogator, which was used for long-range course plotting. The navigator's stations had a control panel for inputting course and heading data and the flight path indicator, and supplied information on any deviations or course corrections in progress. It also had controls for the weapons systems.

Other stations on the bridge were provided for communications, engineering, weapons control, gravity control, damage control, environmental engineering, sciences and library computer, and internal security. All stations were normally manned at all times.

Mounted into the room's forward bulkhead, on the ship's centreline, was the main viewscreen. Visual sensor pickups located at various points on the Constitution class' outer hull were capable of image magnification and allowed a varied choice of viewing angles. Only one turbolift serviced the bridge of the original configuration Constitution class starship. On the refit vessel, the bridge had access to two. ("Star Trek: The Motion Picture")

The Star Fleet Technical Manual, now considered apocryphal, states that the bridge was rotated 37° port, which would have the turbolift shaft travel down the centerline of the saucer section. No good reason is given as to why the bridge crew would be looking in another direction than they were travelling.

The computer systems aboard the Constitution class starship were duotronic based. (TOS: "The Ultimate Computer")

Upgrades

The bridge of the Constitution class starships were subject to many minor and major cosmetic changes over their many years of service. In particular, the Main Bridge of the USS Enterprise seems to have underwent considerable changes in appearance over the years. Most notably, its systems were fully upgraded along with the Enterprise refit of 2271. ("Star Trek: The Motion Picture")

By 2285, when the Enterprise had been assigned to Starfleet Academy as a training vessel, the brige had again been upgraded. The bridge of the USS Enterprise-A commissioned one year had been drastically upgraded to reflect the advances made in computer control technology. The bridge module had again been replaced by 2293. The lighter colour scheme of the original Enterprise-A bridge had made room for a more darker, more militaristic layout. ("Star Trek II: The Wrath of Khan", "Star Trek V: The Final Frontier" and "Star Trek VI: The Undiscovered Country")

Propulsion systems

Aft view of a refit configuration vessel

Until 2260, the Constitution class was furnished with a lithium-controlled matter-antimatter reaction assembly, while a dilithium-controlled MARA was installed that year. The vessel's standard cruising speed was Warp 6 (216c), while its maximum cruising speed was Warp 8 (512c). Maximum warp speed was reached by the USS Enterprise at Warp 14.1 (2803c) due to sabotage to the vessel's warp drive system. (TOS: "That Which Survives")

File:Constitution class refit impulsedrive.jpg

A close-up of the refit configuration impulse drive

Following the 2271 refit of the class, the Constitition was equipped with a linear dilithium-controlled MARA, and a pulse dilithium-controlled assembly was installed in 2285 aboard the USS Enterprise. ("Star Trek: The Motion Picture")

The Constitution class' impulse drive system was a twin-port fusion reactor engine, capable of 0.25c.

Main Engineering

File:Constitution original engineering2.jpg

Engineering in 2268

File:Constitution Engineering.jpg

Upper Engineering level on a refit Constitution

File:Constitution class refit engineering.jpg

Refit configuration Main Engineering deck in 2272

Main Engineering was from where the ship's warp system was controlled. All thrust and power systems were primarily controlled form this site, as were the vessel's life support and gravitional control systems. (TOS: "The Ultimate Computer")

During the 2271 Constitution class refit, the interior design of the engineering section was drastically upgraded, featuring the vertical warp core and the horizontal intermix area. Main Engineering was lodged on Decks 14 and 15. Deck 14 was the uppermost level of the engineering hull, and was the anchoring framework for the connecting dorsal and the warp nacelle pylons. On the forward end of the deck was the engineering computer monitoring room, which encircled the cortical intermix shaft and opens, to the rear, into the engineering computer bay.

Deck 15 housed the main engineering room. Located in the centre of the room, and extending for many levels both above and below the deck, was the vertical linear intermix chamber. This complex, radically new design in intermix technology, provided operational power for the impulse drive system and furnished enough additional energy to power all other shipboard systems. Both matter and antimatter for this chamber were contained in a series of magnetic bottles, which were housed in pods at the base of the intermix shaft. ("Star Trek: The Motion Picture")

Tactical systems

File:Constitution class refit torpedo.jpg

Torpedo bay (refit configuration)

File:Constitution class refit configuration phasers.jpg

A refit Constitution vessel fires its forward phasers.

File:Constitution class original engineering hull.jpg

Firing its stardrive section aft phasers.

Originally, the Constitution class starships were equipped with high-powered lasers. By the 2260s, the vessel had four phaser banks and photon torpedo launchers fore and aft (furnished with approximately one hundred torpedoes) at its disposal. (TOS: "The Cage", "Arena") The ship's phasers had an effective range of 300,000 kilometers and were used in sublight combat. The vessel's main phaser banks were located on the lower half of the saucer section, forward of the sensor dome. Two additional banks were located on the stern, above the starship's shuttlebay. (ENT: "In a Mirror, Darkly") Phasers could be adjusted to different settings: when the ship was in planetary orbit, an experienced operator could use them to stun, heat, or disintegrate objects or beings on the surface.

During the 2260s, photon torpedoes were effective only at distances up to 750,000 kilometers. Photon torpedoes, however, gather momentum from their launcher, and their velocity is sustained by a small onboard engine, making them an effective defense when travelling at warp. Photon torpedoes contained packets of matter and antimatter which were held apart by magnetic seals until forced together to generate an explosion. ("Briefing: U.S.S. Enterprise NCC-1701", Star Trek: The Magazine, July 1999, issue 3)

Transporter systems

File:Constitution original transporter.jpg

Transporter room in the 2260s.

File:Constitution class refit transporter.jpg

Refit configuration transporter room.

File:Constitution class refit armoury.jpg

Staging area in 2272.

Extravehicular transporter to and from the ship was accomplished by a number of transporter systems, which allowed personnel or equipment to be transported over large ranges. The transporter platform featured six pads, which were numbered clockwise, beginning with the right front. A redesigned field generator matrix was mounted into the rear wall of the chamber aboard the refit configuration Constitution class starships.

Aboard the refited Constitution class vessels, the transporter operator stood within an enclosed control pod, which had a floor-to-ceiling transparent aluminium panel through which he or she could view the transport platform. This panel served to shield the operator from the effects of any cumulative radiations emitted by the new transporter machinery, a side effect of the more powerful system.

A door in the standard transporter room wall led to a staging area where landing parties prepared for transporter. Four spacesuit lockers line one wall; each containing one suit, providing enough to clothe a standard party of four. A small, locked arms cabinet held phasers; communicators, tricorders, translators, and outerwear were contained in a separate cabinet on another wall. ("Star Trek: The Motion Picture")

Landing bay and cargo facilities

File:HangarDeck.jpg

Original configuration shuttlebay.

File:Constitution class refit landingbay.jpg

Landing bay on a refit configuration vessel.

Deck 17 was the main access level of the engineering hull. The aft landing bay provided personnel in small craft with a means of entering or exiting the vessel, as did docking port on either side of the level.

The refit configuration Constitution class starship featured a new landing bay design. A wide range of Starfleet and Federation craft could utilize this state-of-the-art landing facility. Alcoves on either side of the landing bay provided storage for up to six standard work bees, and furnished all necessary recharging and refuelling equipment. Additional space was available for the storage of non-ship shuttlecraft.

Just within the landing bay doors was a force field generator unit, which was built into the main bulkheads on either side of the entry area. This field allowed craft to enter the ship, while at the same time retaining the atmosphere and temperature within the landing bay.

Deck 18, the refit configuration shuttlecraft hanger bay, was situated at the widest point of the engineering hull. Much of the deck consisted of open space, as it was the midlevel of the cargo facility; thirty-two cargo pod modules could be stored in the alcoves lining the forward, port, and starboard sides of the bay. The shuttle hangar had sufficient room for the storage of four craft at any given time. During normal storage situations, these shuttlecraft faced aft ward.

This deck also housed the vessel's lifeboat facilities. These one-man craft, which escaped through blow-away panels in the side of the secondary hull, were provided for those persons were unable to reach the primary hull in case of an emergency. ("Star Trek: The Motion Picture")

Crew support systems

File:Constitution class refit sickbay.jpg

Intensive Care Unit on a refit configuration vessel.

File:Constitution class refit examination room.jpg

Refit configuration examination room.

Medical systems

On the original Constitution class starships, a Sickbay facility was located on Deck 6, which featured an examination room, a nursery, the Chief Medical Officer's office and a medical lab. At least one other medical lab was located elsewhere on the vessel, and was used for biopsy among other things. (TOS: "The Naked Time")

The sickbay set of the pilot episode "Where No Man Has Gone Before" underwent considerable changes following the shooting of the episode for the remainder of the series.

With the class refit of 2271, the Medical Facilities of the Constitution class starship were considerably updated. New micro-diagnostic tables were capable of fully analyzing the humanoid body at the sub-cellular level, offering the physician a total understanding of the patient's status. Another new addition was a medical stasis unit, in which patients whose conditions were considered immediately life-threatening could be placed into suspended animation until the proper cure or surgical procedure could be established. ("Star Trek: The Motion Picture")

Crew quarters

File:Original Enterprise quarters.jpg

Crew quarters in the 2260s

File:Jonathan Archer (mirror) in dress uniform.jpg

Senior officers' quarters on an original Constitution.

File:Constitution class refit officers quarters.jpg

Officers' quarters on a refit configuration Constitution.

Crew quarters were located throughout the saucer section -- keeping with Starfleet tradition, Deck 5 housed the senior officers' quarters. On the refit configuration vessels, these staterooms were quite similar to the V.I.P. units on Deck 4, with only a few differences.

On starships of the original configuration, the officers' quarters featured two areas, seperated partly by a wall fragment. One area was allocated as sleeping area, featuring a comfortable bed, and another as work area, including a desk and computer terminal. Entrance to a bathroom was provided through the quarter's sleeping area. (ENT: "In a Mirror, Darkly") Both areas could be configured to personal preference. (TOS: "The Enemy Within")

On the original series, several "different" crew quarters were seen, but always the same set was used, changed by different lighting designs and furniture configuration.

On Constitution class vessels of the staterooms of the senior officers were composed of two areas which were separated by a retractable, transparent aluminum partition. The room's entrance opened into the living area. A library computer terminal and work desk were provided here. The room's corner circular nook, normally occupied by a dining booth, could be modified at the officer's request. The other half of the stateroom was a sleeping area, which held a single large bed that could double as sofa during off-duty relaxation. A transparent door led into the bathroom area. (Star Trek: The Motion Picture)

Recreational facilities

File:Constitution class original recreation.jpg

A typical recreation room (2260s)

Aboard the original Constitution class starships, there were at least six recreation rooms, which included three dimensional chess and card game tables. Also aboard were a gymnasium, a bowling alley, a threatre, and a chapel. (TOS: "Charlie X", "The Naked Time", "The Conscience of the King")

File:Constitution class refit recreation.jpg

Recreation room (refit configuration, 2270s)

On the refitted Constitution class vessels, recreational facilities were further expanded. One large room in the aft section of the starship's saucer section furnished off-duty personnel with a wide variety of recreational games and entertainment.

At the front of the room was an immense, wall-mounted viewing screen. Beneath this was an information display alcove; five small screens exhibited, upon request, a choice of pictorial histories. A raised platform in the center of the lower level floor featured a diversity of electronic entertainment. ("Star Trek: The Motion Picture")

Officers' lounge

File:Constitution class refit lounge.jpg

Officers' lounge privacy area on a Constitution class vessel of the refit lineage.

Located at the stern of Deck 2 aboard the Refit Configuration Constitution class starship was the officers' lounge. Here, four huge view ports afforded a spectacular view of the ship's warp nacelles and space beyond. To the sides, small plant areas held flora from several worlds and a small pool featured fresh-water tropical fish. Just forward of this section of the lounge were two privacy areas. In each privacy area, a view screen was mounted into the wall, providing a full exterior tour of the vessel. ("Star Trek: The Motion Picture")

Ships Commissioned

Four Constitutions fly in formation.

• USS Constitution (NCC-1700)
• USS Constellation (NCC-1017)
• USS Defiant (NCC-1764)
• USS Enterprise (NCC-1701)
  • ISS Enterprise (NCC-1701) (in the Mirror Universe)
• USS Enterprise (NCC-1701-A)
• USS Excalibur
• USS Exeter
• USS Hood
• USS Intrepid
• USS Lexington
• USS Potemkin
• USS Yorktown

Uncertain Ships

• USS Essex
• USS Farragut
• USS Kongo (NCC-1710)
• USS Merrimack (NCC-1715)
• USS Republic (NCC-1371)

Appendices

Appearances

• Star Trek: The Original Series
• Star Trek: The Animated Series
• Star Trek Movies:
  • Star Trek: The Motion Picture
  • Star Trek II: The Wrath of Khan
  • Star Trek III: The Search for Spock
  • Star Trek IV: The Voyage Home
  • Star Trek V: The Final Frontier
  • Star Trek VI: The Undiscovered Country
• DS9:
  • "Trials and Tribble-ations"
• ENT:
  • "In a Mirror, Darkly"
  • "In a Mirror, Darkly, Part II"
  • "These Are the Voyages..."

Background information

The model

As art director on the original series, Walter Matthew "Matt" Jefferies was given the assignment to design the Enterprise itself. His only guidelines were Roddenberry's firm list of what he did not want to see: not any rockets, nor jets, nor firestreams. The starship was not to look like a classic, and thus dated, science-fiction rocketship, but neither could it resemble anything that would too quickly date the design. Somewhere between the cartoons of the past and the reality of the present, Matt Jefferies had to give at a design of the future.

The sketch Gene Roddenberry and Herb Solow approved.

The theory that space could be warped was first proposed by Albert Einstein in 1905, and first demonstrated, according to Star Trek canon, by Zefram Cochrane in 2063, providing that objects could travel faster than the speed of light. Warp drive is a delicately balanced, intricate web of chemistry, physics, mathematics, and mystery.

"I was concerned about the design of ship that Gene told me would have 'warp' drive," Jefferies explained. "I thought, 'What the hell is warp drive?' But I gathered that this ship had to have powerful engines – extremely powerful. To me, that meant that they had to be designed away from the body. Boy, I tried a lot of ideas. I wanted to stay away from the flying saucer shape. The ball or sphere, as you'll see in some of the sketches, was my idea, but I ended up with the saucer after all. Gene would come in to look over what I was doing and say, 'I don't like this,' or, 'This looks good.' If Gene liked it, he'd ask the Boss (Herbert Solow) and if the Boss liked it, then I'd work on that idea for a while."

So I worked on it for a while, and a couple of weeks later Herb and Gene came in. They liked a bit of this and a bit of that, and I worked on those bits. And then I came up with something I really like, so I preloaded it – used lots of color and put it in a prominent place that made it kind of stand out. And that worked! It looked better than the other sketches and Gene said, 'That one looks good!' They – and Bobby Justman, too, when he came aboard later – were a dream to work with."

Designing the bridge

Matt Jefferies' bridge floorplan

Concerning the design of the Enterprise's bridge, Jefferies explained: "It was pretty well established with the model that the thing was going to be in a full circle. From there it became a question of how we were going to make it, how it could come apart, where the cameraman could get into it. [...]"

"I decided that the crewman would work like in the navy, so foten would be on for four hours, off eight hours, and it had better be comfortable. The switches would all be so that the crewman doesn't have to reach for anything. Each of the viewing screens would be at right-angles to his eyes, and we drew a full size section of the bridge that way. I wanted an all-black instrument panel that would light up form behind which is pretty much what we came up with. I did all of the artwork on each one of the instruments, and got the negative, put the colour on the negative and mounted 'em under black glass. I was still assembling those things on one side of the bridge when they were shooting the other side..."

William Shatner, director on The Final Frontier, had been so impressed with Herman Zimmerman's work on The Next Generation as production designer that he hired Zimmerman to upgrade the Enterprise interiors for the film. Hence the upgraded bridge from the movie resembles the brigh atmosphere reminiscent from The Next Generation. For The Undiscovered Country, however, the bridge was once more redesigned to reflect director Nicholas Meyer's more militaristic approach on Star Trek.

An Enterprise that never was

File:PhaseIIenterprise.jpg A Ralph McQuarrie Enterprise concept art, ultimately rejected in favour of Jefferies' design.

File:Mattjeffriesconc.jpg The model built for the never-realized Star Trek: Phase II by Don Loos.

Ralph McQuarrie, best known to the public for his stunning production designs for the Star Wars films, was hired by Ken Adam to help develop the designs for a new Star Trek movie, ultimately abandoned to make way for Star Trek: Phase II, the new television series.

File:Star Trek Phase II ad.jpg

Early ads for The Motion Picture portrayed the upgraded Enterprise initially designed for Phase II by Jefferies.

Their Enterprise-design, however, was abandoned, and Roddenberry asked Matth Jefferies to update the famous starship to reflect the refit that would be part of the series' backstory. Jefferies' redesign changed the engine nacelles from tubes to thun, flat-sided modules, and tapered their supports. He also added the distinctive photon torpedo ports on the saucer connector.

"Basically," Jefferies said, "what I did to it was change the power units, and make a slight change in the struts that supported them. I gave the main hull a taper, then I went flat-sided and thin with the power units, rather than keeping the cylindrical shape. Trying to work out the logic of the refit, I knew a lot of the equipment inside would change, but I didn't see that there would be any need to change the exterior of the saucer. Certainly, though, the engines would be a primary thing to change. Part of the theory of the ship's design in the first place was that we didn't know what these powerful things were or how devastating it would be if anything went awry, so that's why we kept them away from the crew. And that meant they could be easily changed if you had to replace one."

Unlike the first redesign of the Enterprise, Jefferies' new version was built this time by Don Loos, who had built the original ship for the original series. But when Paramount abandoned its plans to create a fourth television network and subsequently transformed the second Star Trek series into the first movie, that Enterprise was packed away as movie director Robert Wise brought in a new art director -– Richard Taylor -– who assigned Andrew Probert to do a second redesign of the ship, essentially keeping with Jefferies' new lines, while adding the extensive detail that was necessary for a motion-picture miniature.

Creating a Motion Picture Enterprise

Probert's suggestion for the officers' lounge's location.

Officers' lounge concept art.

For Star Trek: The Motion Picture, a new Enterprise was designed by Andrew Probert, based upon Mike Minor's concepts for Star Trek: Phase II. Other artists who worked on the refit design were Joe Jennings, Douglas Trumbull, and Harold Michelson.

As art director Richard Taylor felt that they should stay with the proportions inherited from Jefferies' upgraded Enterprise for Star Trek: Phase II, Probert lengthened the ship with merely a few feet and enlarged the saucer, eventually adding an updated superstructure to the top and bottom of it. Additionally, he came up with the new photon torpedo launcher, redesigned the whole nevigational deflector dish area, updated the impulse engine, and added phaser banks around the ship.

One of Probert's key concerns as production illustrator on The Motion Picture was that the sets built somehow conformed to the structure of the starship they were supposed to exist within. Here we see Andrew Probert's development sketches for an officer's lounge in the saucer section's upper dome. Probert's concept art was, however, not used for the movie, and a much cheaper set was constructed for the scene.

File:Mike Minor cargodeck.jpg

Mike Minor concept.

File:TMP cargobay film.jpg

The filmed cargo bay scene.

File:TMP cargobay matte.jpg

Drawing the cargo bay's matte painting.

File:Probert matte rendering.jpg

The end result.

File:Probert matte rendering 2.jpg

View of the cargo bay from a lower angle.

Probert's main contribution for the Enterprise interior came in the form of the vessel's cargo deck, thoughts on which had already been visualized by veteran Mike Minor, before Probert had a chance to address it. Minor worked at the Paramount lot, while Probert was at the Robert Abel special effects facility designing various pieces of space hardware.

The thinking, then at Paramount under production designer Harold Michelson, was that the cargo bay would be a space 30 feet high that had two walls with twelve holes containing cargo pods. Mike Minor's cargo deck design shows us cargo pods simply stacked or lined up on the deck, leaving a huge open and unused space above. The walkways along the sides were also rather old fashioned looking.

The image to the right shows the plate of the cargo deck scene, filmed from Kirk's perspective as he enters the new Enterprise. What Andrew Probert was required to do was to get a frame of plate film and have it printed at a pre-determined size. Part of this frame, required for the live action elements, would be cut out and pasted to a piece of illustration board. The remaining blank board, intended to be the matte, would then be painted around that piece, blending the two together.

Cutaway sketch.

Following a discussion with Douglas Trumbull examining the logic of the early cargo deck concepts, this elevation sketch of the Enterprise was drawn by Andrew Probert upon Trumbull's question how the pods would get in and out of the cargo deck. What Probert proposed was that the landing bay and cargo deck be connected, allowing the easy passage of cargo trains.

The idea was that shuttles would normally take off from and land in the landing bay. They then could be lowered to the Hanger Bay level, or lowered another level to shuttle maintenance. A multi-paneled two-story door, between the elevators and cargo bay, has been opened to the sides allowing the transfer of cargo.

Apocrypha

Although not considered canon, several sources have produced a long list of Constitution class starships. The main source was Franz Joseph's Star Fleet Technical Manual, which listed over 100 Constitution class ships divided into sub-classes: Constitution, Bonhomme Richard, Achernar and Tikopai. Ships of the class were later expanded by other publications such as Ships of the Starfleet which included the Endeavour, Enterprise and Enterprise (II) sub-classes.

• USS Constitution (NCC-1700)
• USS Constellation (NCC-1017)
• USS Republic (NCC-1371)
• USS Enterprise (NCC-1701)
• USS Farragut (NCC-1702)
• USS Lexington (NCC-1703)
• USS Yorktown (NCC-1704)
• USS Excalibur (NCC-1705)
• USS Exeter (NCC-1706)
• USS Hood (NCC-1707)
• USS Intrepid (NCC-1708)
• USS Valiant (NCC-1709)
• USS Kongo (NCC-1710)
• USS Potemkin (NCC-1711)
• USS Bonhomme Richard (NCC-1712)
• USS Monitor (NCC-1713)
• USS Hornet (NCC-1714)
• USS Merrimack (NCC-1715)
• USS Endeavour (NCC-1716)
• USS Defiant (NCC-1717)
• USS Excelsior (NCC-1718)
• USS Eagle (NCC-1719)
• USS Lafayette (NCC-1720)
• USS Wasp (NCC-1721)
• USS El Dorado (NCC-1722)
• USS Ari (NCC-1723)
• USS Saratoga (NCC-1724)
• USS Tori (NCC-1725)
• USS Krieger (NCC-1726)
• USS Essex (NCC-1727)
• USS Truxton (NCC-1728)
• USS Confiance (NCC-1729)
• USS Bunker Hill (NCC-1730)
• USS La Vengeance (NCC-1731)
• USS Achernar (NCC-1732)
• USS Sol (NCC-1733)
• USS Jupiter (NCC-1734)
• USS Rigel Kentaurus (NCC-1735)
• USS Quindar (NCC-1736)
• USS Proxima (NCC-1737)
• USS Androcus (NCC-1738)
• USS Astrad (NCC-1739)
• USS Mondoloy (NCC-1740)
• USS Alfr (NCC-1741)
• USS Thelonii (NCC-1742)
• USS Xanthii (NCC-1743)
• USS Sirius (NCC-1744)

Footnotes

• Registry numbers: Although the Star Trek Encyclopedia and other references provide complete registry numbers for many Constitution class ships, these numbers are at best conjecture. Many of the Encyclopedia's numbers, especially, were derived from the faulty assumption that the list seen on the wall at Starbase 11 in "Court Martial" were all Constitutions. Many fans now doubt that claim.

• Uncertain ships: These ships have been listed in various references as Constitutions, but were never seen on screen as such, and are therefore of uncertain class.

• "Starship" class: If you read the dedication plaque on the bridge of the original Enterprise, it was actually listed as "Starship Class". The term Constitution class came later, probably from "Space Seed", where one of Scotty's technical manual screens showed a phaser bank diagram for a "Constitution class" starship. Though it was "understood" to have been Constitution Class by both production staff and fans alike, the first time it was actually referred to as such was by Captain Jean-Luc Picard in "The Naked Now".

• "Enterprise" class: The exact designation of the Constitution refit is a divisive one within Star Trek fandom. Some maintain that the comprehensive nature of the refit of the Constitutions between TOS and the movie era constitutes a new starship class, while others consider the two types maintaining the same profile and hull geometry as keeping the class consistent.
  • In Star Trek II: The Wrath of Khan, the USS Enterprise simulator at Starfleet Academy refers to the ship as an "Enterprise class" vessel. However, the blueprints that Scotty is seen examining in Star Trek VI: The Undiscovered Country are labeled "Constitution Class (Refit)".
  • Both designations are supported by behind the scenes material and interviews, Andrew Probert in particular mentioning that the design for the refit was originally designated "Enterprise-class".
  • The official canon maintains the (Refit) classification as the correct designation.

• USS Yorktown: Gene Roddenberry suggested that the USS Enterprise-A was first designated as USS Yorktown, and later recommissioned as USS Enterprise-A.

This is a featured article. At the time it was featured, it was considered one of the best examples of the Memory Alpha community's work. If you see a way this page can be improved further though, we invite you to contribute.

---

Revision ID missing! • Date missing! • Blurb