|Owner:||United Federation of Planets|
|Active:||2280s - 2370s|
|Mass:||2,350,000 metric tons|
|Armament:||26 phaser banks, 6 Photon torpedo launchers|
|Owner:||United Federation of Planets|
|Active:||2290s - 2370s|
|Mass:||2,350,000 metric tons|
|Armament:||26 phaser banks, 6 Photon torpedo launchers, quantum torpedoes (USS Lakota)|
|Master System Display|
The Excelsior-class was a type of Federation starship used by Starfleet from the late 23rd century through the late 24th century. It was the backbone of Starfleet for nearly a century, making it one of the longest serving starship designs, and one of the most recognizable ships in the fleet.
Starfleet had high hopes for the first ship of this class, the prototype USS Excelsior, which was equipped with transwarp drive, and was regarded as that century's "Great Experiment." (Star Trek III: The Search for Spock)
- See: Trial runs for more concise details of the USS Excelsior's early history.
Despite the failure of the "Great Experiment," Starfleet forged ahead with employing the Excelsior design. After remaining in Earth Spacedock until at least 2287, the prototype Excelsior was subsequently recommissioned for active service by 2290. (Star Trek IV: The Voyage Home, Star Trek V: The Final Frontier, Star Trek VI: The Undiscovered Country)
In 2293, the fate of the Excelsior design was sealed when Starfleet passed on the name of a legacy. The launch of the USS Enterprise-B opened the door for the Excelsior-class to become one of the most widely used designs in all of Starfleet, a design lasting well into the late 24th century. (Star Trek VI: The Undiscovered Country; Star Trek Generations; TNG: "Encounter at Farpoint" – VOY: "Endgame")
Once fully integrated into the fleet, the Excelsior's sister ships were used for a variety of mission profiles, ranging from deep space exploration and terraforming missions, to patrol duty, to courier and transport runs. (Star Trek VI: The Undiscovered Country; TNG: "Tin Man", "The Drumhead", "Brothers", "Allegiance"; DS9: "Homefront", "For the Uniform", etc.) The Excelsior-class was also frequently used by the Starfleet flag officers for use as a personal flagship. (TNG: "The Offspring", "The Best of Both Worlds", "Chain of Command, Part I", "Descent", "Preemptive Strike")
The Excelsior-class was present in several major Federation engagements, including the Borg invasion of 2366-2367, where it participated at the Battle of Wolf 359, as well as the engagement against the Borg sphere that entered the Sol system in 2378. (DS9: "Emissary"; VOY: "Unity", "Endgame") They were also present in numerous Dominion War battles, seeing action during Operation Return, the First and Second Battles of Chin'toka, and the Battle of Cardassia. Many Excelsior-class vessels were stationed on the front lines near Deep Space 9 during the war. (DS9: "Sacrifice of Angels", "Tears of the Prophets", "The Changing Face of Evil", "What You Leave Behind", etc.)
Details of this class would be retained well into the 31st century, when Captain Jonathan Archer and Lieutenant Malcolm Reed viewed schematics on the class in the 22nd century while accessing the database belonging to temporal agent Daniels. (ENT: "Shockwave")
The Excelsior-class featured the saucer section-engineering section-warp nacelle layout common to most Starfleet vessels. However, it featured a more streamlined design than was seen in previous classes.
Following its initial, and somewhat unsuccessful origins, the Excelsior underwent a minor refit, which included a new bridge module, in addition to a significant modification to the aft portion of the saucer section, surrounding the impulse drive, and a modification to the cargo bay on the aft ventral portion of the ship. This configuration would remain the standard for the Excelsior-class throughout its service. (Star Trek VI: The Undiscovered Country)
In less than a decade, the Excelsior design underwent a second, more significant overhaul, as introduced with the launch of the Enterprise-B. While remaining true to the original design, this new configuration added several modifications to the basic hull, including the addition of a second pair of impulse engines, an expanded scoop surrounding the deflector dish, and the addition and removal of a number of fins located on the saucer and nacelles. (Star Trek Generations; DS9: "Paradise Lost")
As this class aged, Starfleet continued to incorporate the latest technology, through continued upgrades, refits and repairs, well into the 2360s and 2370s. In 2364, the USS Melbourne underwent significant repairs at Starbase 74, while in 2367 the USS Hood underwent a major system upgrade at Starbase 174. (TNG: "11001001", "Brothers", etc.)
The original Excelsior design was outfitted type 8 phaser emitters in five dual phaser emplacements on the forward saucer section, and one dual emplacement on the aft of the saucer. Phaser banks were also positioned laterally, located port and starboard, near the point that the primary and secondary hulls meet, as well as one emplacement located between the nacelles. (Star Trek VI: The Undiscovered Country; Star Trek Generations production art; DS9: "Paradise Lost", etc.)
In addition, the Excelsior was equipped with several photon torpedo launchers. The two primary launchers were located in the forward section, on both sides of the deflector dish seen as two dark colored ports ahead of the starfleet hull banners. The upper forward launchers were located on the neck section, also allowing ship access for cargo management units. Aft launchers were located above the main shuttlebay. (Star Trek Generations production art) In addition, the shields were stronger than the Template:ShipClass refit, capable of withstanding a direct photon torpedo strike without suffering any visible damage to the outer hull. (Star Trek VI: The Undiscovered Country)
With the impending threat of the Dominion against the Federation, Starfleet began to experiment, in 2372, with performing a refit on the Excelsior-class USS Lakota. Upgrades included improved phaser emplacements, quantum torpedoes, and other improvements to make the ship competitive with such ship designs as the Template:ShipClass. (DS9: "Paradise Lost")
Initially the Excelsior was designed under a radically new principle in propulsion, the transwarp drive. While an awe-inspiring concept to some, it was the traditional engineers who remained skeptical of this new form of warp drive. (Star Trek III: The Search for Spock) Following this failure, the Excelsior spent the next two years in spacedock before being fitted with a traditional warp drive. (Star Trek IV: The Voyage Home; Star Trek V: The Final Frontier; Star Trek VI: The Undiscovered Country)
By the early 24th century, Excelsior-class vessels were normally equipped with dilithium recompositing and recrystallization technology. The theta-matrix compositor of the time, which later became outdated, was upgraded by the time the Template:ShipClass was introduced. This new recrystallization process was ten times more efficient than that of the Excelsior-class. (TNG: "Family")
Located on top of the primary hull, the Excelsior's main bridge directly supervised all primary mission operations and coordinated all departmental activities. Due to the age and variety of configurations of the Excelsior-class, bridge configurations varied from ship to ship.
Against the aft wall of many Excelsior bridges was the large engineering master systems display monitor, showing a cutaway of the ship and status information. This was not originally part of the USS Excelsior configuration but added later, a feature shared with sister ship USS Enterprise-B. (Star Trek III: The Search for Spock; Star Trek VI: The Undiscovered Country; Star Trek Generations; VOY: "Flashback")
At least one Excelsior-class starship, the USS Malinche, had a holo-communicator installed in its main bridge in 2373. Upon first use of the technology, Malinche Captain Sanders described to Captain Benjamin Sisko, who was on the transmitting end on board the USS Defiant, "you appear to be sitting on my bridge. It may take me a while to get used to this." (DS9: "For the Uniform")
The captain's ready room was located adjacent to the bridge, and contained a desk and chair, along with a personal viewer, and was backed by several LCARS interfaces and an MSD. (TNG: "Unnatural Selection", "Tin Man"; DS9: "Paradise Lost")
Ensign Nog of Deep Space 9 once explained to Chief O'Brien how Al Lorenzo liked to sneak into famous starship captain's offices and take holophotos of himself sitting behind their desks. Included in Lorenzo's collection was a holophoto of himself sitting behind Captain DeSoto's desk on board the Hood. (DS9: "Treachery, Faith and the Great River")
The deflector room, located on Deck 15, Section 21-alpha, was positioned directly behind the Excelsior's deflector dish. It was a small control room that could be accessed by a series of catwalks and ladders. The deflector room housed several consoles, in addition to the ship's deflector relays. (Star Trek Generations)
Shuttle and cargo bays
The Excelsior-class contained several cargo bays, including one located in the aft dorsal section of the secondary hull as well as several bays located along the ventral section of the secondary hull. (Star Trek Generations production art) The main shuttlebay was located in the stern by the landing bay doors, which housed several shuttles of different types, including the type 7 shuttlecraft. (TNG: "The Child")
- USS Berlin (NCC-14232)
- USS Cairo
- USS Charleston (NCC-42285)
- USS Crazy Horse
- USS Enterprise (refit, NCC-1701-B)
- USS Excelsior (prototype, NX-2000/NCC-2000)
- USS Farragut
- USS Fearless (NCC-14598)
- USS Fredrickson (NCC-42111)
- USS Gorkon
- USS Hood (NCC-42296)
- USS Intrepid (NCC-38907)
- USS Lakota (refit, NCC-42768)
- USS Malinche
- USS Melbourne (NCC-62043)
- USS Potemkin (NCC-18253)
- USS Repulse (NCC-2544)
- USS Valley Forge (NCC-43305)
- USS Al-Batani
- USS Atlantis (NCC-72007)
- USS Crockett
- USS Grissom
- USS Livingston
- USS Okinawa
- USS Roosevelt
- USS Sarek
- USS Tecumseh (NCC-14934)
- Star Trek films:
- "Encounter at Farpoint"
- "The Naked Now" (computer display)
- "Where No One Has Gone Before"
- "The Last Outpost" (computer display)
- "Datalore" (computer display)
- "Conspiracy" (computer display)
- "The Child"
- "Tin Man" (model & display)
- "The Offspring"
- "The Best of Both Worlds"
- "The Drumhead"
- "Chain of Command, Part I"
- "Chain of Command, Part II"
- "The Pegasus"
- "Preemptive Strike"
- "The Way of the Warrior"
- "Paradise Lost" (refit configuration)
- "By Inferno's Light"
- "Doctor Bashir, I Presume"
- "Ties of Blood and Water"
- "For the Uniform"
- "Blaze of Glory"
- "Call to Arms"
- "A Time to Stand"
- "Sons and Daughters"
- "Behind the Lines"
- "Favor the Bold"
- "Sacrifice of Angels"
- "The Magnificent Ferengi"
- "One Little Ship"
- "Honor Among Thieves"
- "Change of Heart"
- "Wrongs Darker Than Death or Night"
- "Tears of the Prophets"
- "Once More Unto the Breach"
- "It's Only a Paper Moon"
- "Field of Fire"
- "Badda-Bing, Badda-Bang"
- "The Changing Face of Evil"
- "What You Leave Behind"
- ENT: "Shockwave" (computer display)
In the script for Star Trek III, the Excelsior was described as "a super starship. Her lines are similar to Enterprise, but she is clearly bigger, sleeker, and very new. She sits at her mooring like the new Queen of Space." In relation to the Enterprise, "their size differential is apparent (B-29 to B-17)."
The following information of specifications and defenses comes exclusively from the Star Trek: Deep Space Nine Technical Manual:
- Production Base: ASDB Integration Facility, Utopia Planitia Fleet Yards, Mars
- Type: Explorer
- Accommodation: 750 officers and crew; 130 visiting personnel; 9,800 personal evacuation limit
- Power Plant: One 1500 plus Cochrane warp core feeding two nacelles; one impulse system
- Dimensions: Length, 511.25 meters; beam, 195.64 meters; height, 86.76 meters
- Mass: 2,350,000 metric tonnes
The advent of the Excelsior design and transwarp are referenced in Diane Carey's novel Battlestations! and also the non-canon licensed reference Mr. Scott's Guide to the Enterprise by Shane Johnson. Shiplists and specifications of many unseen and conjectural Excelsior-class vessels are included in many role-playing game supplements such as the Federation Ship Recognition Manual and the TNG Officer's Manual from FASA, and the Decipher sourcebook Starships, although much of the information conflicts with other sources.
In the video game Star Trek: Elite Force II, the player character leads a mission aboard the Excelsior-class vessel USS Dallas, NCC-2019. The dedication plaque states that the Dallas is the "last starship of her class."
Star Trek Online features the Excelsior-class and her refit as a commander level (Tier 3) "Advanced Heavy Cruiser" and rear admiral level (tier 5) "Advanced Heavy Cruiser Retrofit" respectively. This ship is equipped with a Transwarp Computer allowing you to Transwarp to different Sector Blocks.
In the novel adaptation of Star Trek Generations, Captain Sulu is performing an emergency saucer separation drill aboard the USS Excelsior when he receives word about Kirk's death aboard the USS Enterprise-B.
- Excelsior class at Memory Beta, the wiki for licensed Star Trek works
- Size of the Excelsior-class at Ex Astris Scientia
Featured revision (917267) • Diff to current • Blurb