Memory Alpha
Register
Memory Alpha
m (stub for now)
 
(expanded, will finish later)
Line 1: Line 1:
 
{{at|nt}}
 
{{Sidebar starship class|
 
{{Sidebar starship class|
 
|Name = ''Bardeen''-type shuttlecraft
 
|Name = ''Bardeen''-type shuttlecraft
Line 7: Line 8:
 
|Type = [[Shuttlecraft]]
 
|Type = [[Shuttlecraft]]
 
|Active = [[2250s]]
 
|Active = [[2250s]]
|image2 = Shuttle 78072 interior.jpg
+
|image2 = Bardeen type shuttlecraft MSD.jpg
|imagecap2 = Interior with transporters
+
|imagecap2 = [[MSD]]
 
}}
 
}}
The '''''Bardeen''-type shuttlecraft''' was a [[shuttlecraft]] type operated by [[Starfleet]] in [[2250s]].
+
The '''''Bardeen''-type shuttlecraft''' was a [[shuttlecraft]] type operated by [[Starfleet]] in the [[2250s]]. ({{film|11}})
  +
{{stub}}
 
  +
== Physical arrangement ==
  +
This type of shuttlecraft had two engine [[nacelle]]s attached to the dorsal sides of the main body of the shuttlecraft and stub wings positioned below the center line.
  +
  +
=== Interior ===
  +
The '''Bardeen''-type was used primarily as a troop transport, but the interior could be reconfigured to a variety of layouts.
  +
  +
==== Cockpit ====
  +
[[File:Bardeen type shuttlecraft cockpit.jpg|thumb|left|The cockpit]]
  +
Standard to every shuttle was the [[cockpit]], which was accessible from the aft compartment through a pressure door located in the center of the craft. The cockpit had two seats with the [[helm]] located on the [[port]] side of the craft.
  +
  +
==== Layout A ====
  +
[[File:Bardeen interior.jpg|thumb|Interior layout A]]
  +
This layout had four rows of seats facing each other running the length of the shuttle, forming two aisles. This configuration allowed equipment to be stored between the two center rows of seats.
  +
  +
==== Layout B ====
  +
This layout had the seats arranged in pairs of two facing forward with two aisles running down the length of the shuttle.
  +
  +
==== Layout C ====
  +
This layout had seats running along the hull on either side, with the center section of the shuttle clear. This configuration was used on shuttles that had a cargo door on the [[ventral]] hull and a [[gravity plate]] on the roof of the cabin.
  +
  +
==== Layout D ====
  +
[[File:Shuttle 78072 interior.jpg|thumb|Interior with two transporters]]
  +
This layout had seats running along the hull on either side, with the center of the cabin occupied with two [[transporter pad]]s.
  +
  +
== Shuttles of this type ==
  +
*''[[Bardeen]]''
  +
*[[Enterprise shuttle 89|Shuttle 89]]
  +
*[[Military Shuttle 12091]]
  +
*[[Shuttle 78072]]
  +
  +
{{bginfo|The shuttlecraft ''[[Gilliam]]'' originally appeared as a [[Moore type shuttlecraft|''Moore''-type shuttlecraft]] with its nacelles positioned low on the sides of the craft. However, in the reveal shot of the ''Enterprise'' it was a ''Bardeen''-type with its nacelles attached to the dorsal sides of the hull.}}
  +
  +
{{clear}}
  +
== Background information ==
  +
<div style="float:right"><gallery perrow="2">
  +
File:Bardeen type shuttlecraft cockpit.jpg|''Bardeen''-type cockpit
  +
File:Kelvin type shuttlecraft cockpit.jpg|''Kelvin''-type cockpit
  +
</gallery></div>
  +
The cockpit of the ''Bardeen''-type was a redress of the [[Kelvin type shuttlecraft|''Kelvin''-type shutlecraft]]'s cockpit, with Captain {{alt|Christopher Pike|Pike}} sitting on the port side while Captain [[Richard Robau|Robau]] sat on the starboard side.
  +
 
[[Category:Federation shuttle classes]]
 
[[Category:Federation shuttle classes]]

Revision as of 22:58, 4 April 2011

AT: "nt"

The Bardeen-type shuttlecraft was a shuttlecraft type operated by Starfleet in the 2250s. (Star Trek)

Physical arrangement

This type of shuttlecraft had two engine nacelles attached to the dorsal sides of the main body of the shuttlecraft and stub wings positioned below the center line.

Interior

The 'Bardeen-type was used primarily as a troop transport, but the interior could be reconfigured to a variety of layouts.

Cockpit

File:Bardeen type shuttlecraft cockpit.jpg

The cockpit

Standard to every shuttle was the cockpit, which was accessible from the aft compartment through a pressure door located in the center of the craft. The cockpit had two seats with the helm located on the port side of the craft.

Layout A

Bardeen interior

Interior layout A

This layout had four rows of seats facing each other running the length of the shuttle, forming two aisles. This configuration allowed equipment to be stored between the two center rows of seats.

Layout B

This layout had the seats arranged in pairs of two facing forward with two aisles running down the length of the shuttle.

Layout C

This layout had seats running along the hull on either side, with the center section of the shuttle clear. This configuration was used on shuttles that had a cargo door on the ventral hull and a gravity plate on the roof of the cabin.

Layout D

Shuttle 78072 interior

Interior with two transporters

This layout had seats running along the hull on either side, with the center of the cabin occupied with two transporter pads.

Shuttles of this type

The shuttlecraft Gilliam originally appeared as a Moore-type shuttlecraft with its nacelles positioned low on the sides of the craft. However, in the reveal shot of the Enterprise it was a Bardeen-type with its nacelles attached to the dorsal sides of the hull.

Background information

The cockpit of the Bardeen-type was a redress of the Kelvin-type shutlecraft's cockpit, with Captain Pike sitting on the port side while Captain Robau sat on the starboard side.