Memory Alpha
Register
Advertisement
Memory Alpha
USS Odyssey firing phasers

The USS Odyssey, a Galaxy-class starship using its main phaser array on a Dominion Jem'Hadar attack vessel

A phaser array is an arrangement of phaser emitters located in strategic areas of a starship, space station, or other vessel. In the 23rd century, phaser arrays had smaller numbers of emitters, and were commonly referred to as phaser banks. (TOS: "The Corbomite Maneuver", "Balance of Terror") By the 24th century, Starfleet began to fit its vessels and facilities with phaser arrays that contained much larger numbers of emitters.

During the firing sequence of some shipmounted arrays, phaser energies would travel along the emitter strip and converge at the best position for targeting. (Star Trek: The Next Generation)

Template:ShipClass ships, in the docked configuration, generally exhibited eleven phaser arrays. Two large arrays encircled the dorsal and ventral surfaces of the command module. The other nine arrays were on the engineering module: two upper aft arrays inward of the saucer impulse engines, one on the ventral surface of the engineering section, two lateral arrays on the warp nacelle pylons, and two aft arrays each on the dorsal and ventral pylon surfaces proximate to the aft photon torpedo launcher. An additional array, on the "cobra head" of the engineering module, was only exposed and usable when the ship was separated into its two components. (Star Trek: The Next Generation)

This information, which supports twelve phaser arrays, is from visual inspection of Galaxy-class ships and is further supported by the Star Trek: The Next Generation Technical Manual. Curiously, in TNG: "Conundrum", Worf stated that the Galaxy-class Enterprise-D only had ten "phaser banks."

Template:ShipClass vessels were equipped with fourteen phaser arrays plus 4 separete phaser banks. On the primary hull, there were two main arrays (one starboard, one port) on each of the dorsal and ventral surfaces, and two smaller aft arrays (also one starboard and one port) on each surface. One behind the bridge. The other five arrays were on the engineering section: one on the ventral surface, two lateral ventral arrays on the warp nacelle pylons, and two aft arrays on the underside of the lateral pylon. Two separete phaser banks ( the Intrepid-class aft launchers have phaser banks VOY: "Dragon's Teeth", one phaser bank was located behind the second tractor beam emitter, at the aft end of the secondary hull in the aft section of Deck 14 (VOY: "Think Tank" ). (Star Trek: Voyager)

The later Template:ShipClass starships originally had twelve arrays, including seven dorsal arrays and five ventral arrays. (Star Trek: First Contact) By 2379, four additional arrays were added to the nacelle pylons of the Sovereign-class USS Enterprise-E, bringing the total complement of arrays to sixteen. (Star Trek Nemesis)

In 2371, Korinas asked Benjamin Sisko for information on the USS Defiant's phaser array. (DS9: "Defiant") In the early months of the Dominion War, the crew of the Defiant placed depleted phaser array power cells in the mess hall as a sign they would not stop fighting. (DS9: "Behind the Lines")

Cardassian Template:ShipClass vessels were equipped with multiple phaser arrays which could cover 360 degrees. These were used during Operation Return primarily to destroy Federation attack fighters. (DS9: "Sacrifice of Angels")

According to Star Trek: The Next Generation Technical Manual, the Galaxy-class arrays were designated Type-X. The Sovereign-class arrays were designated Type-XII according to the Star Trek: Starship Spotter.

Template:PhaserTechnology

Advertisement